This time we tried a different method. I cut a piece cellophane and mesh and placed it on my design (in that order). I then glued the mosaic tiles directly on a mesh with Weldbond adhesive. The beauty of this method is that you can see the design through the mesh and you can attach it to the surface later without the need of transferring the tiles.
The design was made on the fly again since I didn't know what the project was going to be so I went with folk chickens and a checker border.
After all the tiles were glued onto the mesh, I applied thin set to backing board and placed the mosaic on top. I pressed the mosaic a bit and left it to dry so I can grout it later.
No comments:
Post a Comment